The MTP-300T recovery vehicle is a mobile technical support unit designed to provide damaged vehicle evacuation, troubleshooting and assistance to the crews in labour-intensive maintenance operations.
The vehicle features high maneuverability, perfect cross-country and amphibious capabilities. The engine and the transmission used in the vehicle ensure high acceleration and speed characteristics as well as the capability of the vehicle to be used in combat jointly with state-of-the-art fighting vehicles.
The engine and the transmission are united into a single power pack. The feeding systems are fitted with quick-to-disconnect couplings which enable fast replacement of the power pack.
Hydraulic boosters in the control linkages reduced the force to be applied to the vehicle controls to the up-to-date ergonomic norms.
Passive night-vision devices enable driving the vehicle by night without IR illumination.
The state-of-the-art manipulator used on the vehicle ensures high accuracy, efficiency and security of mounting/dismantling operations in a large working zone during repair works.
Weiht, t |
16,50 |
Dimensions, mm |
|
length |
7100 |
width |
3200 |
height |
3100 |
ground clearance |
370 |
Crew, men: |
|
commander |
1 |
driver |
1 |
crew member |
1 |
Power-to-weight ratio, hp/t |
18,2 |
Average specific ground pressure, kg/cm2 |
0.51 |
Speed, km/h |
|
maximum over highway |
60 |
average over earth road |
45 |
reverse |
8 |
maximum water speed |
10 |
reverse water speed |
5 |
Fuel range, km |
|
on highway |
380 — 420 |
on earth road |
290 — 340 |
on water |
80 — 140 |
Average fuel consumption per 100 km, l |
92 |
Average oil consumption per 100 km, l |
2.8 |
Obstacles: |
|
max gradient, deg |
38 |
side slope, deg |
18 |
trench, m |
2.8 |
wall, m |
1.1 |
water entry angle, deg |
30 |
water exit angle, град |
25 |
Technological Equipment, Jigs, Tools and Accessories
Technological equipment, jigs, tools and accessories are designed for repair, recovery and maintenance of tracked and wheeled vehicles. The vehicle is fitted with the following:
Manipulator Specifications | |
Max load-lifting capacity at 2.7 m, kg |
3030 |
Hook lifting height above ground level, m |
9.5 |
Hook lowering height below ground level, m |
8.4 |
Operating radius, m |
|
minimum |
0.65 |
maximum |
7.51 |
Boom |
трехсекционная, телескопическая |
Boom length, m |
|
retracted |
3.31 |
extracted |
7.70 |
Boom extracting speed, m/sec |
4.39/11 |
Boom lifting speed, deg/sec |
78/7 |
Column rotation range, deg |
360 w/o limitations |
Column rotation speed, rpm |
2.5 |